ISO 45001:2018
Occupational health & safety certificate
Risk assessment, permits, prevention and training
- Certificate no.
- 26RN08GV
- Initial certification
- 17/08/2026
- Valid until
- 16/08/2029
▽ +06.00Health, safety & environment
Safety planned for every site
A plan for every site: risk assessment, permits to work, training and records, coordinated with the owner and the consultant.
Certified systems
Two certified systems for safety and environment
ISO 14001:2015
Environmental management system certificate
Environmental impact, safe handling and waste segregation
- Certificate no.
- 26RN08GU
- Initial certification
- 17/08/2026
- Valid until
- 16/08/2029
Issued by: Royal Impact Certification Ltd · 1st surveillance audit 16/07/2027 · 2nd surveillance audit 16/07/2028
The site plan
The site safety cycle
Every activity starts with its risk assessment, and its observations and corrective actions are recorded.
- 01
Risk assessment
For every site and activity before work starts, coordinated with the owner and the consultant.
- 02
Permit to work
For high-risk activities, with entry permits for confined spaces.
- 03
Daily toolbox talk
A daily safety meeting (toolbox talk) with the site crew.
- 04
Personal protective equipment
PPE suited to every activity.
- 05
Work under control
Work to the permit and the instructions, with a standby attendant outside confined spaces.
- 06
Record and correct
Observations, near misses and corrective actions recorded.
Main site risks
Four risks we plan for on every site
- R-01
Working at height
ControlsHarnesses, lifelines, suitable scaffolding and secured roof edges.
- R-02
Confined spaces & basements
ControlsVentilation, gas testing, entry permits and an outside watch.
- R-03
Chemicals & insulation materials
ControlsProper protection, safe storage and safety data sheets.
- R-04
Spraying & high pressure
ControlsEquipment and hoses checked; operators trained to start and stop safely.
Readiness
Training before work starts
- On-site safety training before work starts
- First aid, fire and evacuation training
- Technical qualification on manufacturers’ system instructions
- Spray equipment and hoses checked; operators trained to start up and shut down safely
- Owner and consultant requirements met
Environment
Environmental management to ISO 14001:2015
- E-01
Environmental impact
The impact of the works on the site and its surroundings assessed under the environmental management system.
- E-02
Safe handling of materials
Chemicals and insulation materials stored and handled following their safety data sheets (SDS).
- E-03
Waste segregation
Site waste segregated under the environmental procedures.
Quality controls are part of the same plan: every layer inspected before it is covered. Quality
QQuestions
Questions clients ask
How is roof waterproofing work kept safe?
With edge protection or harnesses, hot-work permits for torching with extinguishers at hand and safe storage of gas cylinders, ventilation when solvents are used, and heat-stress management in summer — under the ISO 45001 certified safety system.
Next step
Need our HSE documents for prequalification?
We send the certified-system certificates and the HSE documents your registration asks for.